POSCO E&C creates a cleaner Earth by preserving energy and carrying out eco-friendly smart construction.
Environmental and Energy Management Policy
POSCO E&C recognizes environment and energy as core elements of corporate
management, and all executives, employees, and stakeholders actively practice the
following to implement a sustainable management system:
· Building an Environmental and Energy Management System: Establish an environment and energy management system based on ISO14001/50001 to comply with relevant regulations and lead sustainable leadership.
· Improving Performance and Providing Resources: Establish environment and energy objectives and provide the resources necessary to achieve them, thereby continuously improving the environment and energy management system and performance.
· Reducing Greenhouse Gas Emissions and Climate Impact: Reduce greenhouse gas emissions and minimize climate change impacts through the introduction of green technology, design considering energy efficiency, and green purchasing.
· Conserving Resources and Protecting the Environment: Conserve resources and protect the environment by minimizing waste generation, increasing recycling, and using energy efficiently.
· Realizing Eco-Friendly Construction Sites: Apply optimal technology to prevent environmental damage in order to realize eco-friendly construction sites, minimize pollutant emissions, and provide a pleasant environment for the local community.
· Monitoring, Reporting, and Communicating Performance: Periodically monitor and improve environment and energy operational performance, report to management, and communicate with stakeholders.
- Vision
- Objectives
- Action Plans
-
Realization of sustainable, eco-friendly,
and low-carbon construction sites - Establish a headquarters-centered prevention system so sites can focus on construction, ensuring regulatory compliance and greenhouse gas reduction
-
Establishment of a Phased
Pre-vention System
[RM] Proactive identification and review of environment/energy risks (ESG risks, noise simulation, applicable regulations, etc.)[Initial Stage] Headquarters-driven environment/energy set-up[Construction Stage] Transparent information sharing and enhanced monitoringResponse to the Greenhouse
Gas Emission Trading Scheme
Establish R&R (Roles and Responsibilities) by headquarters and departments tailored to new regulationsImprove data reliability through monthly verificationProvide guidance on practical greenhouse gas reduction cases at construction sitesStrategic emission trading through benchmarking against peer companies
Practice System (Environmental Management Plan for Each Stage of Construction)
- Installation
- Procurement
- Construction
- Communication
-
R&D
- Developing eco-friendly construction methods
- Developing eco-friendly technologies that utilize IT
-
Design
- Eco-friendly design
- Preventing and eliminating environmental risk factors
-
Procurement
- Supporting suppliers’ development of eco-friendly products
- Expanding green partnerships
-
Construction
- Eco-friendly worksite management
- Focused environmental risk management
-
Disposal
- Operating waste management systems
- Reducing waste generation
-
Marketing
- Organizing contest for eco-friendly construction best practices and ideas
- Eco-friendly campaign
Certificate
ISO 14001:2015
ISO 50001:2018
Biodiversity Conservation
POSCO E&C has stipulated a biodiversity conservation policy and is carrying out various activities to preserve biodiversity throughout the entire business process.
POSCO E&C Biodiversity Conservation Policy
Policy
Biodiversity loss is one of the greatest risks facing humanity, and the construction industry directly or indirectly affects biodiversity loss through anthropogenic changes to animal and plant habits. Accordingly, POSCO E&C recognizes its responsibility to conserve biodiversity and actively promotes various activities for biodiversity preservation throughout the entire project precess.
Practice guidelines
- All executives and employees recognize the importance of biodiversity and practice it in our work.
- We conduct environmental impact assessments according to the type and size of domestic and overseas business sites to investigate, analyze, and predict the impact on biodiversity to prepare and implement measures to minimize harmful effects.
- The results of environmental impact assessments such as on endangered species and legally protected species are registered in the company's environmental management system and continuously monitored and managed.
- We conduct activities for biodiversity conservation in collaboration with stakeholders such as local communities and NGOs.
- We transparently disclose financial information related to natural capital in accordance with the recommendations of the Taskforce on Nature-related Financial Disclosures (TNFD), a consultative body for the disclosure of nature-related financial information.
Green Technology Certification for Eco-Friendly Dust Suppressants (2022) and the Launch of an In-house Venture (2024)
With growing concerns about the harmful effects of fine particulate matter (PM), complaints related to fugitive dust from construction sites are also on the rise. Although conventional chemical compounds can reduce dust, they often face challenges in obtaining environmental certifications. In response, POSCO E&C has developed an eco-friendly dust suppressant that minimizes environmental impact while maintaining high effectiveness, earning Green Technology Certification from the Ministry of Environment. Additionally, through the in-house venture 'EcoPD,' we are working to commercialize this technology.
Initial Acquisition of ISO 50001 (Energy Management) Certification (2023)
ISO 50001 is an energy management system standard established by the International Organization for Standardization (ISO). It is a management system standard that harmonizes technical and managerial aspects, enabling companies to systematically establish and continuously manage energy efficiency activities. POSCO E&C obtained this certification for the first time in 2023 to proactively respond to regulations such as the Construction Industry's Greenhouse Gas Target Management System and to address climate change company-wide.
Comprehensive Renewal of POEMS (POSCO E&C Environmental Management System) in 2023
POSCO E&C developed and has been operating POEMS (POSCO E&C Environmental Management System), a computerized environmental management system compliant with ISO international standards. While the system was maintained with minor updates, a comprehensive renewal was undertaken to enhance on-site convenience and work efficiency, in line with recent trends such as mobile apps. It was launched at the end of 2023 and now serves as a tool for realizing environmentally friendly construction sites.
Independent development of the nation’s first 3D simulation of construction noise
POSCO E&C compensates for damage through simulation program when a noise damage occurs during a construction. We have developed the nation’s first 3D simulation of construction noise, which enables to estimate the noise damage within three days, which originally took two months. It evaluates the civil complaint risks upon order intake, decides how tall soundproof walls should be during construction, determines whether it should apply noise reducing methods, etc. As such, applying this technology facilitates the decision about installation of noise reducing facilities and prepares grounds for compensation for damage.
Acquisition of patent for insulation panel for reducing aluminum-form-dismantling noise and extended application of low noise construction methods
In the process of dismantling the aluminum form used in the frame construction, there occurs thunder-like noise over 150 dB. POSCO E&C has developed a method to reduce the shock noise and obtained the patent for the method. We are making continuous improvements by combining the existing polycarbonate insulation panel with vinyl bubble mesh or securing the safety of workers and enhancing workability through the installation of a passage. In addition, we have set the standards for application of an adequate insulation panel and shock-reducing method considering the distance between the noise source and the damaged areas and the work conditions. Relevant videos are also made and distributed for field workers to easily understand such process.
Development of dry wheel-cleaning facility using L-shaped section steel
POSCO E&C has developed and is operating a dry wheel-cleaning facility using structural steel. Residual soil and water that can’t be removed solely by the wet wheel-washing, which is the legal standard, can be a major cause of civil complaints of the area adjacent to the construction field due to car and road pollution and ice formation in winter. Through dry wheel-cleaning facility, we are playing a role as an eco-friendly company that maintains clean environment for local residents and achieving zero law violation.
Development of unmanned high-speed sprinkler that can sprinkle water in various environments
Field workers find it difficult to follow the water sprinkling measures due to the issues such as frequent change of working locations, electricity leading-in, water supply, distribution of manpower, etc. Therefore, POSCO E&C has developed an unmanned high-speed sprinkler after deriving the idea from a sprinkler for agricultural use, discussing, and making a sample. The apparatus has many strengths as it can be installed in areas where electricity can be reached, operated unmanned, save water, sprinkle water to wide area, and is movable. It can be applied to various fields, including demolishing sites, roads, construction, and plant. The unmanned sprinkler became the winner of the Chairman Prize at the 16th Excellent Construction Environment Management Cases Contest, which was organized by the Korea Environment Construction Association and sponsored by The National Assembly Environment & Labor Committee, the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and the Korea Environment Corporation.